FiberBlade IV


Highly dynamic, optimised operating cycles and the most compact design are the correct measures to give optimum support to the efficient and robust fibre laser technology.

“In line” plate alignment recognition, axial accelerations of up to 1.5 g and a dynamic hole piercing process reduce the “unproductive cycle times” to a minimum.

Real time control of the laser power (“ZipCut” function) allows previously unknown dynamic performance for sheet thicknesses up to 2 mm. Special software splits the components in a completely new way independently of their individual contours. Wherever possible the cutting head processes all contours lying in one direction. On the paths which are to be cut, flying starts come from the motion and the laser power is switched off synchronised to the end of the cutting path. The cutting program is quasi processed in rows and columns, paths are optimised and collisions avoided strategically. This means that the majority of the braking and acceleration cycles no longer happen. The FiberBlade IV is convincing not only through this but also by its remarkably smooth running despite its highly dynamic performance.

Touchscreen control, clear structuring of the control, optimum accessibility to the cabin as well as “auto calibration of the nozzle characteristics” increase operator comfort.

A mere 14 seconds for the pallet swap and automatic slag removal in both cutting and unloading areas complete the picture. Minimal maintenance requirements and online diagnostics facilitate very economic performance and maximum availability.


  • Cutting system with fibre laser: 2 to 6 kW
  • Efficiency 25 % – 35 %
  • Low accelerated masses
  • Linear guides
  • Diagonal toothed drive racks
  • High acceleration up to 1.5 g
  • Simultaneous speeds up to 140 m/min
  • Positioning accuracy +/- 0.03 mm
  • Repetitive accuracy +/- 0.01 mm
  • Automatic calibration of height sensing
  • Automatic focal point adjustment
  • Multi staged, fast piercing
  • ZipCut function
  • Suppression of “torch lifting” wherever possible
  • Lowest maintenance and adjustment work
  • Simplest operation, consistent control with remote maintenance
  • Unbeatable cut metre costs
  • Complete laser protection system
  • Automatic nozzle cleaning
  • Modular handling systems available